1. May 21, 2017  

    Any solution to avoid 132 error?

    Only one way to get this - exit game, and just for small part of team (sometimes 1x, 4x, 7x). Anyway, this annoying. I had this on PTR as well.

  2. May 21, 2017  

  3. May 21, 2017  
    I just logged in then exit the game with /quit
    3 of 10 clients made this:
    http://imgur.com/a/MzvNJ

    If someone else have smth like this, try to delete "SET gx Multisample Quality" line in config.wtf. Already, 7-9 exits of game and no issue.
    Edited: May 24, 2017

  4. I recently started playing on TBC again. And again this issue. Sometimes nothing, sometimes just on 1 pc.

  5. Hum, did you uncheck the Read Only box on your folder ?

  6. I had this issue a couple of times some time ago and I concluded that, at least in my case, it was caused by DirectX not having cleared its stuff in memory properly. A simple reboot made the issue go away for me.

  7. https://eu.battle.net/support/en/article/8288

    You got old hardware?
    Try:
    Redownload client and update your drivers.
    Install CrystalDiskInfo and check you hdd/sdd.
    Run Memory Diagnostic Tool https://eu.battle.net/support/en/article/31356
    or download memtest86.
    The last act is always reinstall whole windows.

    In MOP these errors are almost always server side problems.
    If you play in TBC/Wotlk these are very rare and almost always your PC hardware/software problem.
    Edited: October 31, 2017

  8. https://eu.battle.net/support/en/article/8288

    You got old hardware?
    Try:
    Redownload client and update your drivers.
    Install CrystalDiskInfo and check you hdd/sdd.
    Run Memory Diagnostic Tool https://eu.battle.net/support/en/article/31356
    or download memtest86.
    The last act is always reinstall whole windows.

    In MOP these errors are almost always server side problems.
    If you play in TBC/Wotlk these are very rare and almost always your PC hardware/software problem.
    I had no problem with other games and no probs at Wotlk. Also, no problem in MoP. SSD's fine on both PC'es.
    I'll give a try to redownload client.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •